Fluke 789 ProcessMeter

Key features

 

---

Product overview: Fluke 789 ProcessMeter™

Fluke 789 ProcessMeter™ doubles your troubleshooting power
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.

The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

Do a lot more while carrying a lot less
The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.

Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.

Accuracy
This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.
 

---

Specifications: Fluke 789 ProcessMeter™
 

Specifications
Current measurement	Range	0-1 A AC or DC
	Resolution	1 mA
	Accuracy	0.2% + 2 LSD (DC)
	Range	0-30 mA
	Resolution	0.001 mA
	Accuracy	0.05% + 2 lSD
Current sourcing	Range	0-20 mA or 4-20 mA
	Resolution	0.05% of span
	Drive capability	24 V Compliance or 1200 Ω @ 20 mA
Frequency	to 19.999 kHz, 0.005% + 1 LSD
Continuity	Beeps for resistance < 100 Ω
Voltage measurement	Range	0-1000 V AC (true-rms) or DC
	Resolution	0.1 mV to 1.0 V
	Accuracy	0.1% Rdg + 1 LSD (VDC)
Resistance measurement	to 40 MΩ, 0.2% + 1 LSD
Diode test	2.0 V shoes diode voltage drop
Display current and % of span	Yes
Auto Step, Auto Ramp	Yes
Environmental Specifications
Operating temperature	-20°C to 55°C
Storage temperature	-40°C to 60°C
Humidity (without condensation)	95% up to 30°C 75% up to 40°C 45% up to 50°C 35% up to 55°C
Temperature coefficient	0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)
Safety Specifications
Electrical safety	Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
Overvoltage category	IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V
Maximum voltage	1000 V RMS
Mechanical and General Specifications
Size (H x W x L)	50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in)
Weight	610 g (1.6 lbs)
Batteries	4 AA alkaline batteries
Warranty	3 years
Battery life	140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock and vibration	Random, 2 g, 5-500 Hz 1 meter drop test

 

---

Models: Fluke 789 ProcessMeter™

Fluke 789
Fluke 789 ProcessMeter™
Includes:

• AC175 Alligator Clips
• Four (4) AA 1.5 V alkaline batteries (installed)
• TL71 safety-designed test lead set

 

---

Compatible accessories: Fluke 789 ProcessMeter™

Cases and holsters (5)
Fluke C125 Meter Case
Fluke C25 Large Soft Case for DMMs
Fluke CXT80 Extreme Case
Fluke CAMO-C25 Camouflage Carrying Case
Fluke C550 Tool Bag

Test leads, probes and clips (34)
Fluke AC220 SureGrip™ Alligator Clips
Fluke AC280 SureGrip™ Hook Clips
Fluke AC283 SureGrip™ Pincer Clips
Fluke AC285 SureGrip™ Alligator Clips
Fluke AC89 Heavy Duty Insulation Piercing Test Clip
Fluke BP980 Double Banana Plug Kit
Fluke AC87 Heavy Duty Bus Bar Clip Set
Fluke L215 SureGrip™ Kit with Probe Light and Probe Extenders
Fluke TL910 Electronic Test Probes
Fluke TP38 Slim Reach Test Probe Set
Fluke TP1 Slim Reach Test Probes
Fluke TP2 Slim Reach Test Probes
Fluke TP220 SureGrip™ Industrial Test Probes
Fluke TP4 Slim Reach Test Probes
Fluke TP80 Electronic Test Probes
Fluke TP912 Replacement Tips for TL910
Fluke H900 Test Lead Holder
Fluke TL220 SureGrip™ Industrial Test Lead Set
Fluke TL221 SureGrip™ Test Lead Extenders
Fluke TL222 SureGrip™ Silicone Insulated Test Leads
Fluke TL223 SureGrip™ Electrical Test Lead Set
Fluke TL224 SureGrip™ Insulated Test Leads
Fluke TL238 SureGrip™ Test Lead Set for High Energy Environments
Fluke TL26A 60 in. 5-Way Test Lead Set
Fluke TL27 Heavy Duty Test Lead Set
Fluke TL28A Automotive Test Lead Set
Fluke TL40 Retractable Tip Test Lead Set
Fluke TL71 Premium Test Lead Set
Fluke TL75 Hard Point™ Test Lead Set
Fluke TL81A Deluxe Electronic Test Lead Kit
Fluke TL940 Mini-Hook Test Leads
Fluke TL950 Mini-Pincer Test Leads
Fluke TL960 Micro-Hook Test Leads
Fluke TL970 Hook and Pincer Set

Current clamps and probes (6)
Fluke i1010 AC/DC Current Clamp
Fluke 80K-15 High Voltage Probe
Fluke i200 AC Current Clamp
Fluke i200s AC Current Clamp
Fluke i400 AC Current Clamp
Fluke i410 AC/DC Current Clamp

Adapters and cables (6)
Fluke PV350 Pressure Vacuum Module
Fluke FOM Fiber Optic Meter
Fluke TP920 Test Probe Adapter Set
Fluke TL930 Patch Cords (60 cm)
Fluke TL932 Patch Cords (90 cm)
Fluke TL935 Patch Cords (60, 90, 120 cm)

Probes (4)
Fluke 80PK-24 SureGrip™ Air Temperature Probe
Fluke 80K-40 High Voltage Probe
Fluke 80PK-26 SureGrip™ Tapered Temperature Probe
Fluke 85RF High Frequency Probe

Software (1)
Fluke FlukeView® Forms Software with Cable

Thermometer (1)
Fluke 80TK Thermocouple Module